Contact
Diana Aarre Erichsen Salgsassistent daa@efapaint.dk
EFAcombi AK 560 H2O one coat
Series: 0560Based on alkyd and acrylic. Easy to spray and fast drying.
Alkyd/acryl-based water-borne paint. The paint has an anti-corrosive effect.
Minimum order 100 Liter
| Coverage: | Theoretical: 8 m²/ltr. |
| Dry time: |
Dust dry 30 minutes 20 °C Dry to touch 1 hour 20 °C Waterproof after 24 hours 20°C Fully cured 1 week 20 °C |
| Application: |
Conventional spraying 40-45 sec. DIN-cup 4 mm water Airless/Airmix 55-60 sec. DIN-cup 4 mm water Brush and roller |
| Type: | Waterborne |
| Risk: |
- Contains 1,2-benzisothiazol-3(2H)-on. May produce an allergic reaction.
- Avoid release to the environment. |
Application:
Single coat painting of agricultural implements and other steel substrates.
Properties:
Outstanding adhesion and mechanical properties as well as protection against corrosion. Can be applied with 40 - 60 µm dry film in one application.
Pretreatment:
Sandblasting in accordance with SA 2½ or chemical pre-treatment in accordance with ISO 8501-1 is recommended.
At high humidity and low temperatures, the drying time is extended. This product should not be applied at temperatures below 15°C or at a relative humidity greater than 75%. The product must be fully cured before exposure to rain, frost and temperatures below 10°C.This paint may replace e.g. EFAcombi AK 164 one coat. EFAcombi AK 560 H2O one coat can not be produced in high gloss, but with a maximum gloss of 60 - 70.
| Technical datasheets: |
Download (Da-DK)
Download (En-GB/EU) |
| Safety sheets: | Find det her |
